Analysis of Feeding Equipment Such as Apron Feeder on Railway Quarrying Site

Release Time: 2026-06-10
Read: 397
Share:

Ballast is an important component of the railway track. Railway quarries usually use crushers to produce ballast. The feeding process is a crucial step. The success of the setting of the feeding equipment for the crusher directly affects whether the crusher can operate at high efficiency. Especially in the coarse crushing workshop of the quarry, the material to be crushed has large particle sizes and is mixed with dust, and requires the feeding equipment to supply materials to the crusher evenly. The existing feeding equipment includes Apron Feeder, Belt Feeder, Trough Feeder, etc. This article intends to discuss its own views on the selection of feeding equipment for crushers and the layout of feeding machines in the quarry.

 

Selection of feeding equipment

Apron Feeder

The Apron Feeder uses chain plates for bearing and conveying the feed material. It has a large capacity for holding the ore particles and can withstand the impact of the ore. The feeding is uniform and reliable. It is a main equipment used in railway quarries to feed into crushers. According to the pressure of the ore pillars in the ore bin and the size of the feed particles, it is classified into heavy-duty, medium-duty and light-duty types. The light-duty type is suitable for transporting materials with a particle size of less than 160mm and a relatively light weight; the medium-duty type can transport materials with a maximum particle size of approximately 300-400mm; the Heavy-duty Apron Feeder is suitable for materials with a large particle size (up to 1000mm) and a heavy weight, and the maximum particle size to be transported should not exceed half of the width of the chain plate of the feeder.

The Apron Feeder has two installation configurations: horizontal and inclined. The transmission device is divided into left-mounted transmission and right-mounted transmission. When the plate feeder is installed inclinedly, the transmission device should be installed horizontally.

Belt Feeder

The Belt Feeder uses flexible rubber belts for carrying and transporting materials. It is widely used in coal mines and chemical systems and is suitable for handling materials with a particle size of no more than 200mm. The transportation distance of the Belt Feeder can be longer. Its structure is simple and easy to maintain. However, it cannot withstand large-sized and heavy materials, the rubber belt wears out quickly, and the maintenance workload is large.

Trough Feeder

The Trough Feeder is simple in construction, easy to install and reliable in operation. During the movement of the materials, they can be loosened and pre-screened, reducing the workload of the crusher. However, its disadvantage is that the feeding volume is adjusted naturally, and when the particle size of the materials is large, it is prone to clogging the hopper. In terms of layout, it occupies more space than the electromagnetic vibration feeder.

Comparison of feeding equipment

Adaptability to particle size and hardness

The apron feeder uses heavy steel plate chains as the load-bearing components, with a strong overall structure that can directly withstand the impact of large pieces of material. For large chunks of ore, granite, scrap steel, etc., which have a particle size of over 1m, it can stably feed without the need for a pre-sieving or crushing process, significantly simplifying the production line process.

The bearing body of the belt feeder is a rubber belt, and large hard materials are prone to tearing the belt. Generally, it can only handle fine crushed materials with a particle size of 300mm or less.

The trough feeder uses the vibration of the trough body to achieve material transportation. The impact of extremely large pieces of material is likely to cause deformation of the trough body and damage to the exciter. The maximum processing particle size is generally no more than 500mm.

Adaptability to humidity and viscosity

The gap of the chain plates of the apron feeder is large. When transporting sticky and wet materials, excess moisture and fine particles can be pre-screened from the gap, and there will be no problem of material sticking to the components. Even clay, wet coal, and wet slag with a moisture content of 30% or more can be stably transported without blockage.

When transporting sticky and wet materials with the belt feeder, the material is likely to stick to the surface of the belt and cannot be discharged normally. Long-term operation will cause the belt to deviate, tension to decrease, and even slippage and breakage.

The trough feeder has an overall closed structure for the trough body. Sticky and wet materials are likely to adhere to the trough wall, gradually reducing the cross-sectional area of the transportation, and eventually causing blockage and machine shutdown, requiring manual cleaning, which seriously affects production efficiency.

Adaptability to high-temperature materials

The metallurgical and building materials industries often need to transport high-temperature materials, such as sintered ore, hot clinker, and blast furnace slag, with temperatures reaching 500-1000℃. The core components of the apron feeder are all steel, which can withstand high-temperature materials after heat treatment and will not undergo performance deformation.

The belt feeder uses rubber belts, and even high-temperature-resistant rubber belts cannot operate at a temperature higher than 150℃ for a long time. When the temperature exceeds 80℃, the rubber will accelerate aging and the lifespan will be shortened by more than half.

The core components of the trough feeder are the supporting springs and exciter. In high-temperature environments, the elastic modulus of the springs will change, leading to fatigue fractures, and the lubricating oil of the exciter will fail due to high temperature, making it impossible to operate continuously for a long time.

 

Summary of Core Advantages of Apron Feeder

Adaptability to extreme conditions

Whether it is large chunks of hard materials, sticky and wet viscous materials, or high-temperature materials, Apron Feeder can handle them stably without any problems such as blockage, tearing, or component failure. It is the preferred feeding equipment for heavy loads and harsh conditions.

Long-term operational stability

The fully steel-structured design ensures strong impact resistance, stable feeding accuracy, strong overload capacity, and the ability to operate continuously for 24 hours without interruption. The failure rate is much lower than that of the other two types of equipment, ensuring the continuous production of the production line and reducing downtime losses.

Total cost of ownership throughout the life cycle

Although the initial investment of Apron Feeder is slightly higher than that of vibrating feeders and ordinary Belt Feeders, its service life is more than three times that of Belt Feeders. The maintenance cost is only 1/3 to 1/5 of that of Belt Feeders, and the total investment throughout the life cycle is much lower than that of the other two types of equipment. The overall economic benefits are better.

 

Conclusion

In conclusion, for the primary crushing section of the railway quarry, using a heavy-duty apron feeder to feed into the primary crusher is the safest and most reliable method; for the small-scale secondary crushing screening system, a Trough Feeder can be adopted, as its installation and commissioning are both convenient; in the secondary crushing section, a Belt Feeder can be considered.